Grinder Scrub

3 point linkage removable with chain;

Lateral Offsetting;

Gearbox high resistance;

Height of cutting is adjustable on skates;

system of cutting on discs 3 blades 450x100x12;

PTO with a clutch

Model Cut’s width HP Harness Weight
7700 180 60 Standard 360
8270 200 80 Standard 500

 

Levelling Equipment

Equipment pulled by tractor; 3 point connection with tractor; 2 large wheels at the back; Height of blade holder: 50 cm; Unmountable blade (grader type) furnished with detachable flanks on the sides.     Model Height (m) HP Weight (kg) SU 30 3 40  – SU 35 3,5 50  – SU 40 4 60  –…

Blade with Tooth

Tool with three configurations of work : Subsoiler with teeth – Rigid– Blade tooth in forward configuration– Blade tooth in backward configuration; Blade in hardened steel; Ploughshare in cast steel.   Model # of Teeth Working Width (m) Weight (kg) HP (CV) SPN 180 7 180 380 75 SPN 300   11 300 450 95…

Grader Blade

Steel blade treated; directional Blade in 360*; on the march before (pull) or on the march defers (push).

 

Model Working width (m) Weight (kg) HP (CV)
LN 200 2.00 250 70
LN 300 3.00 400 90

 

Vineyard Spreader

3 point linkage; 2 adjustable rows in width;

Hopper capacity: 360 Liters;

Reducing gearbox;

Telescopic PTO;

Type # of Teeth Width of Frame HP Weight
1 1.20 40 120
2 1.80 70 160  –

 

Post-Hole Digger

Reudciton gear with spiral gear in oil bath in 3:1 ratio;

Auger point and sharpened cutting edges are easily replaceable.

Model Auger Range (cm) Ploughing Depth (cm) Weight (kg) HP (CV)
TA 45 45 100 170 60
TA 80 80 100 260 80

 

Broyeur à lames

Attelage amovible avec chaîne et déportable sur les côtés – Boîtiers haute résistance – Hauteur de coupe réglable sur patins;
Système de coupe sur disque 3 couteaux 450x100x12;
Cardan muni d’un embrayage à friction

 

Modèles Largeur Coupe HP Attelage Poids
7700 180 60 Standard 360
8270 200 80 Standard 500

 

Vineyard Plough

Ploughs constructed in treated steel;

Mould-boards in treated sheet metal;
Bar-points in adjustable square steel;
Ploughing depth : 20 cm.

 

Model # of Bodies Working Width (m) Weight (kg) HP (CV)
CHV 2 2 1.10 280 60
CHV 4 4 1.50 400 80
CHV 6 6 1.90 550 100

 

Rouleau Plombeur

Les rouleaux sont en fonte GS et ont un diamètre de 480 mm;
Paliers à roulements.

 

Modèles Nombre d’éléments Largeur de Travail (m) Poids (kg) HP (CV)
ROUL1E 1 3 1000 40
ROUL3E 3 5 1700 65

 

Billonneur 2 disques

Éléments variables et réversible de disques;
Porte disques en acier coulé parfaitement étanche monté sur roulements coniques et système de graissage;
Diamètre des disques : 610 mm lisses;
Largeur de travail : 1, 55 m;
Puissance Requise : 60 CV.